11. Disconnect the display panel cable (2) and the backlight cable (3) from the inverter.
12. Remove the display inverter. The display inverter is available using spare part number
13. If it is necessary to replace the display panel, remove the four Phillips PM2.5×4.0 screws (1) that secure the display panel to the display enclosure.
14. Remove the display panel (2). The display panel is available using spare part number
15. If it is necessary to replace the display hinges, remove the two Phillips PM2.0×3.0 screws (1) that secure each display hinge to the display panel.
Component replacement procedures 61