Compaq V6600, V6500 manual Computer feet, Memory module

Computer feet

Description	Spare part number
Rubber Kit (includes base enclosure rubber feet and display bezel screw covers)	431431-001

The computer feet are adhesive-backed rubber pads. The feet attach to the base enclosure in the locations illustrated below.

Memory module

Description	Spare part number
2048-MB (PC2-5300, 667-MHz, 1-DIMM)	453774-001 and
	457437–001
1024-MB (PC2-5300, 667-MHz, 1-DIMM)	446495-001
512-MB (PC2-5300, 667-MHz, 1-DIMM)	446494-001

Before removing the memory module, follow these steps:

1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system.

2. Disconnect all external devices connected to the computer.

3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer.

4. Remove the battery (see Battery on page 41).

Remove the memory module:

1. Loosen the three Phillips PM2.0×5.0 screws (1) that secure the memory/WLAN module compartment cover to the computer.

44 Chapter 4 Removal and replacement procedures