Bluetooth module
Description | Spare part number |
|
|
Bluetooth module (includes Bluetooth module cable) | |
|
|
Before removing the Bluetooth module, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer.
4. Remove the battery (see Battery on page 41).
5. Remove the following components:
a. Hard drive (see Hard drive on page 42)
b. Optical drive (see Optical drive on page 50)
c. Switch cover (see Switch cover on page 52)
d. Keyboard (see Keyboard on page 54)
e. Display assembly (see Display assembly on page 58)
f. Top cover (see Top cover on page 64).
Remove the Bluetooth module:
1. Disconnect the Bluetooth module cable (1) from the system board.
2. Remove the two Phillips PM2.0×2.0 screws (2) that secure the Bluetooth module to the system board.
3. Remove the Bluetooth module (3).
Component replacement procedures 67
