Hard drive
NOTE: All hard drive spare part kits include a hard drive bracket.
Description | Spare part number |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Before removing the hard drive, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer.
4. Remove the battery (see Battery on page 41).
Remove the hard drive:
1. Loosen the two Phillips PM2.0×5.0 screws (1) that secure the hard drive cover to the computer.
2. Lift the right side of the hard drive cover (2), swing it to left, and remove the cover.
3. Remove the hard drive cover.
NOTE: The hard drive cover is included in the Plastics Kit, spare part number
42 Chapter 4 Removal and replacement procedures
