Compatible Systems 2200R specification

MicroRouter 2200R Installation Guide, Version 3.0 Copyright© 1999, Compatible Systems Corporation

All rights reserved. MicroRouter and CompatiView are trademarks of Compatible Systems Corporation. Other trademarks are the property of their respective holders.

Part number: A00-1194

FCC Notice: This product has been certified to comply with the limits for a Class A computing device, pursuant to Subpart J of Part 15 of FCC Rules. It is designed to provide reasonable protection against radio or television communi- cation interference in a commercial environment. Opera- tion of this equipment in a residential area could cause interference with radio or television communication.

Image 2

Compatible Systems 2200R manual

Contents

MicroRouter 2200R Installation Guide Page Getting Started Network InstallationIntroduction Basic Configuration Guide Command Line Management Appendix a Shipping Defaults Appendix B Connector and Cable Pin Outs Systems Appendix E Terms and Conditions Introduction IntroductionAbout the MicroRouter 2200R MicroRouter 2200R Installation Overview Getting Started Command Line Preparation Introduction Network InstallationCompatiView Software Installation Basic Configuration GuidePage Few Notes Warranty and ServiceGetting Started Please Read The Manuals Supplied with the MicroRouter 2200R Needed For InstallationWhat You Will Need To Get Started Ethernet Connection Requirements Interface Telco Line Connection RequirementsGetting Started 10Base-T Twisted-Pair Ethernet RS-232 Interface Network Installation Placing the Router Connecting to Twisted-Pair Ethernet Connecting the Router to the EthernetConnecting a Line Device to MicroRouter 2200R Connecting Devices to the V.35 Interface Connecting an Out-of-Band Management Console Connecting Devices to the RS-232C Interface Powering Up the Router System Requirements Installation and OperationCompatiView for Windows Transport Protocols and CompatiView Command Line Management Out-of-Band Command Line Management Setting Up Telnet Operation Command Line Management Command Line Management Page Basic Configuration Guide Required for IP Ethernet Interface ConfigurationIP Protocol Suggested for IP DECnet Protocol IPX ProtocolAppleTalk Protocol Suggested for DECnet WAN Interface ConfigurationPhysical Communications Settings Suggested for Dedicated/Leased Line Operation Link ConfigurationRequired for Dedicated/Leased Line Operation Required for Dial-On-Demand Operation IP Protocol Basic Configuration Guide Suggested for IPX DECnet Protocol Frame Relay Configuration Frame Relay Dlci Mappings Required for IP Numbered Interface Required for IP Unnumbered Interface IPX Protocol Smds Configuration Saving a Configuration File to Flash ROM Smds AddressingPage Ethernet Interface Appendix a Shipping DefaultsDefault Password WAN Interfaces Appendix B Connector and Cable Pin Outs Pin Outs for V.35 Female Connector DTE Appendix B Connector and Cable Pin Outs Other Indicators on All LED Bars Power On, No TrafficEthernet Traffic Indicators Ethernet LED Bar Panic Indicators MicroRouter 2200R Switch Settings Appendix C LED Patterns and Test Switch Settings Appendix D Downloading Software From Compatible Systems Page Appendix E Terms Conditions Appendix E Terms and Conditions Appendix E Terms and Conditions Appendix E Terms and Conditions