Basic Configuration Guide | Compatible Systems 2200R guide

Chapter 5 - Command Line Management	15
OUT-OF-BANDCOMMAND LINE MANAGEMENT	15
TEMPORARILY RECONFIGURING A HOST FOR COMMAND LINE
MANAGEMENT	15
SETTING UP TELNET OPERATION	16

Chapter 6 - Basic Configuration Guide	19
ETHERNET INTERFACE CONFIGURATION	20
IP Protocol	20
Required for IP	20
Suggested for IP	20
IPX Protocol	21
Required for IPX	21
Suggested for IPX	21
AppleTalk Protocol	21
Required for AppleTalk	21
Suggested for AppleTalk	21
DECnet Protocol	21
Required for DECnet	21
Suggested for DECnet	22
WAN INTERFACE CONFIGURATION	22
Physical Communications Settings	22
PPP Configuration	23
Link Configuration	23
Required for Dedicated/Leased Line Operation	23
Suggested for Dedicated/Leased Line Operation	23
Required for Dial-On-Demand Operation	23
Suggested for Dial-On-Demand Operation	23
IP Protocol	24
Required for IP	24
Suggested for IP	24
IPX Protocol	24
Required for IPX	24
Suggested for IPX	25
AppleTalk Protocol	25

ii

Image 4

Compatible Systems 2200R manual Basic Configuration Guide, Command Line Management

Contents

MicroRouter 2200R Installation Guide Page Introduction Network InstallationGetting Started Basic Configuration Guide Command Line Management Appendix a Shipping Defaults Appendix B Connector and Cable Pin Outs Systems Appendix E Terms and Conditions About the MicroRouter 2200R IntroductionIntroduction MicroRouter 2200R Installation Overview Getting Started Introduction Network Installation CompatiView Software InstallationCommand Line Preparation Basic Configuration GuidePage Warranty and Service Getting StartedFew Notes Please Read The Manuals Needed For Installation What You Will Need To Get StartedSupplied with the MicroRouter 2200R Ethernet Connection Requirements Getting Started 10Base-T Twisted-Pair Ethernet Telco Line Connection RequirementsInterface RS-232 Interface Network Installation Placing the Router Connecting the Router to the Ethernet Connecting a Line Device to MicroRouter 2200RConnecting to Twisted-Pair Ethernet Connecting Devices to the V.35 Interface Connecting an Out-of-Band Management Console Connecting Devices to the RS-232C Interface Powering Up the Router CompatiView for Windows Installation and OperationSystem Requirements Transport Protocols and CompatiView Command Line Management Out-of-Band Command Line Management Setting Up Telnet Operation Command Line Management Command Line Management Page Basic Configuration Guide Ethernet Interface Configuration IP ProtocolRequired for IP Suggested for IP AppleTalk Protocol IPX ProtocolDECnet Protocol Physical Communications Settings WAN Interface ConfigurationSuggested for DECnet Link Configuration Required for Dedicated/Leased Line OperationSuggested for Dedicated/Leased Line Operation Required for Dial-On-Demand Operation IP Protocol Basic Configuration Guide Suggested for IPX DECnet Protocol Frame Relay Configuration Frame Relay Dlci Mappings Required for IP Numbered Interface Required for IP Unnumbered Interface IPX Protocol Smds Configuration Saving a Configuration File to Flash ROM Smds AddressingPage Default Password Appendix a Shipping DefaultsEthernet Interface WAN Interfaces Appendix B Connector and Cable Pin Outs Pin Outs for V.35 Female Connector DTE Appendix B Connector and Cable Pin Outs Power On, No Traffic Ethernet Traffic Indicators Ethernet LED BarOther Indicators on All LED Bars Panic Indicators MicroRouter 2200R Switch Settings Appendix C LED Patterns and Test Switch Settings Appendix D Downloading Software From Compatible Systems Page Appendix E Terms Conditions Appendix E Terms and Conditions Appendix E Terms and Conditions Appendix E Terms and Conditions