Compex Systems DVR4-80 user manual Press

¾Call Monitor: This field is to set the sequence for the call monitor output.

ƒDwell Time: This field represents the rate at which the cameras will sequence on the call monitor. The dwell time for the auto sequence can be set from 0 to 99 seconds. To change this, simply use the arrow keys on the DVR which also represent the channel 1-4 keys (These are the top four buttons). Use the up and down arrow keys to make your selection.

ƒOperation: This field is to select from camera 1 to 4 for the sequence screen. The default is set to CH1. To change this, simply use the arrow keys on the DVR which also represent the channel 1-4 keys (These are the top four buttons). Use the up and down arrow keys to make your selection.

o Please Note: If an alarm occurs call monitor will display that particular camera automatically.

: Press or to move the cursor to the left or right.

:Press or to change the value.

These keys are located at the top left row of keys (same keys as channel 1-4).

31