Compex Systems DVR4-80 user manual If you have a D-Link Router

¾Once you have a straight through cable plug one end into the LAN port on the back of the recorder and the other into the router.

¾Now Log into the DVR menu and using the jog dial from the

previous chapter go to the Network Setting Menu. (See page 28 for more instructions)

¾If you have a Linksys Router:

ƒAssign an IP address of 192.168.001.050 to the DVR, a Subnet mask of 255.255.255.000, and a default gateway of 192.168.001.001.

If you have a D-Link Router:

ƒAssign an IP address of 192.168.000.050 to the DVR, a Subnet mask of 255.255.255.000, and a default gateway of 192.168.000.001.

If you have a pre-existing LAN:

ƒGo to a Computer on the pre-existing network and do the following: o Go to Start, then Run and type cmd and click on OK.

ƒThen hit enter, type ipconfig and press enter this will give you the information you will need.

ƒUse the prior step to assign an IP address. For example, if you got the IP address from the computer of 192.168.002.101. Assign the DVR’s IP address as 192.168.002.050. Now Copy the subnet mask and default gateway information you got from the prior step off the computer to the DVR.

69