you if you want to do a system update again. Use the arrow buttons to select yes and press the enter button.
Please Note: See System Update Chapter for more details and diagrams. Also after the system has updated successfully, be sure to cycle the power to the digital recorder by turning the power off and then back on.
¾Load Default: This entry is to set the DVR back to factory settings. Please remember if you are having difficulties with your DVR we suggest restoring the defaults before calling Tech support. Initially Load defaults is set to No. To Load the defaults simply use the arrow buttons to change this option to yes. This will bring up a second dialog which asks you if you want to do a load defaults again. Use the arrow buttons to select yes and press the enter button.
Please Note: See Load Defaults Chapter for more details and diagrams. Also after the system has loaded the defaults successfully, be sure to cycle the power to the digital recorder by turning the power off and then back on.
¾Password Enable: This field is to turn the password function on or off. The default is set to No. If you would like to enable the password change this option to yes. To change this, simply use the arrow keys on the DVR which also represent the channel
¾Password: This field is the password for the system when the password is enabled. The password supports up to 6 characters. The available alphanumeric characters are:
0 to 9, A to Z, and /( ) . - * & @ : ”
To change this, simply use the arrow keys on the DVR which also represent the channel
Please Note: For More information please refer to Password Chapter.
: Press | or | to move the cursor to the left or right. |
:Press 
or 
to change the value.
These keys are located at the top left row of keys (same keys as channel
39
