
Chapter 2
Getting Started
Getting started with the subsystem consists of the following steps: Unpack the storage subsystem.
Identifying Parts of the subsystem. Connect the SCSI Cables.
SCSI Termination.
Power on the subsystem. Install Hard Drives.
2.1 Unpacking the Subsystem
Before continuing, first unpack the subsystem and verify that the contents of the shipping carton are all there and in good condition. Before removing the subsystem from the shipping carton, visually inspect the physical condition of the shipping carton. Exterior damage to the shipping carton may indicate that the contents of the carton are damaged. If any damage is found, do not remove the components; contact the dealer where the subsystem was purchased for further instructions.
The package contains the following items:
Getting Started |