4.3.3 Replacing a Fan
1.Unscrew the fan holder.
2.Disconnect the fan cable connects between the backplane and the fan.
3.The fans are attached to the fan holder. Remove the screws on the cor- ners of the defective fan. Place the screws on a safe place as you will need them later when you install a new fan.
Note:
We recommend that you remove the fan holder from the subsystem. This allows easy installation and unlimited workspace when replacing the fan.
4.Install a new fan using the screws you removed in step 3.
5.Replace the fan holder.
6.Reconnect the fan cable connects.
Array Maintenance |