
4. Smart Function Panel - Function Keys for RAID configuration
The smart LCD panel is where you will configure the RAID subsystem. If you are configuring the subsystem using the LCD panel, please press the controller button to configure your RAID subsystem.
Parts | Function | ||
|
|
|
|
Up and Down | Use the Up or Down arrow keys to go through the information | ||
arrow buttons | on the LCD screen. This is also used to move between each | ||
|
|
| menu when you configure the subsystem. |
|
|
|
|
Select button | This is used to enter the option you have selected. | ||
|
|
|
|
Exit button |
|
| Press this button to return to the previous menu. |
| |||
|
|
|
|
5. Environment status
Parts | Function | |
Voltage warning | If the output DC voltage is over or under +3.3V, +5V or +12V, an | |
alarm will sound warning of a voltage abnormality and this LED | ||
LED | ||
will turn red. (+3.3V: ¡Ó5%, +5V: ¡Ó5% , +12V: ¡Ó10%) | ||
|
| |
Over temp | If temperature irregularity in these systems occurs (HDD slot tem- | |
perature over 55oC), this LED will turn red and an alarm will | ||
LED | ||
sound. | ||
| ||
|
| |
Fan fail LED | When a fan’s rotation speed is lower than 2600rpm, this LED will | |
turn red and an alarm will sound. | ||
|
Power fail LED
If a redundant power supply fails, this LED will turn red and an alarm will sound.
Power LED | Green LED indicates power is on. |
|
|
Access LED | Blue blinking LED indicates data is being accessed. |
|
Getting Started |