2.5 Powering-on the Subsystem

When you connect the Disk Array to the Host computer, you should press the ON/OFF Power Supply Switch. It will turn the Disk Array on and the Self- Test will be started automatically.

1.Plug in all the power cords or power connectors located at the rear of the subsystem.

Note:

!The subsystem is equipped with redundant PFC (power factor correction), Full Range power supplies. The subsystem will auto- matically selector voltage.

2.Turn on the power.

3.The “Power” LED on the front panel will turn green. After a few moments the LCD should display the following message:

{Model Name} xxx.xxx.xxx.xxx

Getting Started

2-11