Taking Pictures

Taking Pictures With Self-Timer

Use the self-timer to set a delay between the time the shutter button is pressed and the time the image is captured.

1.Turn the Mode Dial to Auto () or Manual () Mode.

2.Press the Self-Timer button ( ), and the Self-Timer icon () will appear on the LCD.

3.Place the camera on a flat surface or tripod.

4.Use the LCd to compose the picture, and then press the Shutter button to activate the Self-Timer.

• The Self-Timer Lamp will blink until the image is cap tured.

Change the Self-Timer delay

The Self-Timer delay is set to 10 seconds by default. You may change the Self-Timer delay ranging from 2 seconds to 10 seconds through the following steps.

1Turn the Mode dial to Auto or Manual mode.

2 Press MENU.

3 Press the Right or Left button until the SETTING icon ( ) is highlighted.

4 Press the Up or Down button to select the SELF TIMER item.

5 Press the SET button to enter the SELF TIMER submenu.

6 Press the Up or Down button to select the desired self timer delay: 2 ~ 10 seconds.

7 Press the SET button save the setting.

8 Press the MENU button to exit the menu.

NOTE: Press to cancel the self-timer at any time.

SELF TIMER

7

Self timer icon

MN38

07/24/2002

Taking Continuous Pictures

This feature enables the camera to capture a continous series of picture while the Shut- ter button is pressed down.

1.Turn the Mode Dial to Auto ( ) or Manual ( ) Mode.

2.Press the Continous Shot ( ) Button. The Continuous Shot icon ( ) will ap pear on the LCD.

3.Press the Shutter Button to capture the pictures.

Note:

The LCD will be blank when the images are taken in the Continuous Shot Mode.

The camera will take 5 pictures in a row when the Shutter Button is pressed.

Flash will be deactivated in the Continuous Shot Mode.

— 20 —

Page 23
Image 23
Concord Camera 3045 manual Taking Pictures With Self-Timer, Change the Self-Timer delay