1. Focus range mentioned is the distance between the camera lens surface and the subject.

2. Any flash setting can be used in macro mode.

3. Always use the LCD monitor to compose images in macro mode. Shooting with the optical viewfinder is possible, however, images composed with the optical viewfinder might be off-center due to the parallax phenomenon.

Setting the Self-Timer and Continuous Shooting

1.Press the // button to switch between Drive modes until the selected drive mode icon appears on the LCD monitor.

2.Shoot the image.

SettingDescription

Ten seconds

3 images at 1600 x 1200 resolution

Shooting with Self-Timer

If you selected Self-Timer (), after the Shutter button is fully pressed down, the red Self -Timer LED in the front of the camera will blink slowly for 7 seconds, faster for the remaining 3 seconds, then the image will be captured.

The Self-Timer is automatically deactivated once the image is taken.

Continuous Shooting

The camera will automatically and continuously capture 3 consecutive images at

approximately 1 images per second in 1600 x 1200 resolution.

 

To exit the Continuous Shooting function, press the

button until

disappears

from the LCD.

 

 

-22-

 

 

Page 25
Image 25
Concord Camera 4340z manual Setting the Self-Timer and Continuous Shooting, Shooting with Self-Timer, SettingDescription