En
TAKING A PICTURE
USING AUTO-FOCUS LOCK
This feature can be used to freeze the focus when the subject is not located in the center of the picture.
About Auto-Focus LED
When the shutter button is pressed
Steady
The subject is in focus.
About Auto-Focus Frame
A | 3M | 28/45 |
|
|
AWB
Blinking
The camera is setting the focus.
Auto-Focus Frame
AF Frame Color | Description |
|
|
White | No focus. |
Green | The subject(s) is in focus. |
|
|
Using the focus lock:
A | 3M | 28/45 |
|
| |
AWB |
|
|
|
| 28/45 |
fig. 1.1 | fig. 1.2 |
A | 3M | 28/45 |
AWB |
|
|
|
| 28/45 |
fig. 1.3 | fig. 1.4 |
1.Position the subject in the frame center. (fig.1.1)
2.Press the Shutter button halfway down until the AF frame turns green and the green AF LED stops blinking. (fig.1.2)
3.Recompose your picture. (fig.1.3)
Keep the Shutter pressed
4.Press the Shutter button fully to capture the picture. (fig.1.4)
Note: The AF LED will continue blinking in the following conditions:
1.There are several subjects at different distances within the focus lock area. Recompose the picture by moving the camera slightly.
2.There is no color contrast. Recompose the picture with a subject that contains more color.
3.There is insufficient lighting. Increase the lighting in the surrounding area.
4.Please refer to P.11 to change Auto Focus Mode and refer to P.24 to change AF assist light setting.
11
