En

TAKING VIDEO CLIPS

TAKING VIDEO CLIPS

The camera can capture video clips with sound.

28 SEC

Press Shutter to Record

To record a video clip:

1.Slide the Mode Switch to ( ) Video Clip Mode.

2.Position the subject in the LCD.

3.Press the Shutter button half-way to activate the focus until the green AF LED stops blinking and the AF frame turns green.

4.Press the Shutter button fully to capture a continuous video clip. The time recorded will be shown on the LCD. The camera can take video clips until the memory is full.

To stop recording:

1.Press the Shutter button again to stop recording.

OR

2.The camera will continue recording until the memory limit has been reached.

Video Clip Information

Resolution: QVGA (320x240) or

QQVGA (160x120) (Best for e-mail)

Frame rate: 30fps

File Format: AVI (Motion Picture)

Note:

1 SEC

Press Shutter to Stop

Do not open the battery door or turn the camera off while recording. Otherwise the video clip may not be stored.

Higher capacity memory cards can take longer video clips.

The Flash, Macro, Continuous Shooting, and Zoom in/out are deactivated in video clip mode.

25

Page 27
Image 27
Concord Camera 4062AF, 5062AF manual Taking Video Clips, To record a video clip, To stop recording, Video Clip Information