Connect Tech CTIM-00060 user manual Configuration

Connect Tech Inc. FreeForm/Express S6 - PCIe Spartan-6 FMC Carrier User Manual

Configuration

The FreeForm/Express S6 is designed so that the Spartan-6 configuration image is automatically loaded from the on-board SPI flash at power- up. When a valid configuration is loaded, led D4 is illuminated. JTAG configuration can be used at any time to program the FPGA.

The FreeForm/Express S6 is fitted with a x4 32 Mbit SPI flash (Winbond W25Q32BVSFIG), which can be programmed indirectly via JTAG using Xilinx’s IMPACT.

Function	JTAG programming
Location	P5
Type	1x7 0.100” header
	Samtec TSW-107-08-F-S-RA
Pinout
		Pin	Signal	Description
		1	TRST#	Reset, not used by Xilinx
				products
		2	TMS	Select
		3	TDI	Data In
		4	TDO	Data Out
		5	TCK	Clock
		6	GND	Digital Ground
		7	VCC	Chain power, 3.3V

Function	Manual Reset
	Pulls the Spartan-6 PROG_B pin to ground, resetting and
	reconfiguring the FPGA
Location	J1
Type	1x2 0.100” jumper block
Pinout
			Position	Description
		1-2		+5V
			off	floating
Default	Floating

Revision 0.01 12