Cooper Bussmann BU-245U-E Extending Range of a Network with a Repeater Hop

64 www.cooperbussmann.com/BussmannWirelessResources
Cooper Bussmann BU-245U-E Wireless Ethernet & Device Server User Manual
Client Configuration
Perform the same configuration steps as the Access Point configuration with the following differences:
Enter “Network”,and select Operating Mode as Client.
Device Mode should be set to Bridge.
Set the Gateway IP address to 169.254.102.54
Set the Ethernet IP address to 169.254.102.53, network mask 255.255.255.0
Set the Wireless IP address to 169.254.102.53,network mask 255.255.255.0
Click on button Save to Flash and Reset.Webpage will display that message indicating details are being written to flash. Wait for BU-245U-E to
reboot before removing power.
Extending Range of a Network with a Repeater Hop
Configure units as described in Section “Extending a wired network.”Place the Access Point at the remote intermediate repeater location.
Additional repeaters can be added using Wireless Distribution System (WDS) – refer 3.13 ”Multiple AP Repeater Mesh Network for further details.
3A1576Rev1.6