www.cooperbussmann.com/BussmannWirelessResources 89
Cooper Bussmann BU-245U-E Wireless Ethernet & Device Server User Manual
JPerf Application
Jperf is a graphical interface that runs over the top of Iperf. It will display a graph result from the Iperf test.
To run Jperf open a CMD prompt and change to the “jperf-2.0.2:directory and run the “Jperf” application as shown in Figure 4. The CMD screen
will disappear and the Jperf Screen will appear as seen in Figure 5.
Figure 4
Figure 5
When Jperf screen appears select Client Mode, enter in IP address of the Server PC; leave Port as default and press Run Iperf button.The test will
run again and the Bandwidth (Throughput) display will show results of the test.
Note: Jperf runs using Java technology and depending on PC setup further installation of Java software may be required.
3A1576Rev1.6