Operation |
|
| |
• | Use the | button to pick up and hang up. This is true for | |
| headset and handset operation when in headset mode. | ||
• | Pressing Speed Dial buttons or Line buttons will cause the telephone | ||
| to go off hook. Use the | button to hang up. | |
NOTE: It is important to remember that the hook switch is inoperative when in headset mode. If you use the handset and then hang up the handset, the phone will not disconnect from the telephone line. You
| must use the | button. |
|
Hold |
|
|
|
Holding a Call |
|
| |
• | While on a conversation, press the | button to place the call | |
| on hold. The line button corresponding to the call on hold will blink | ||
| on and off repeatedly. |
|
|
• | A Reminder Tone will be heard every 30 seconds while the call is | ||
| on hold. This can be disabled. See Hold Reminder. | ||
Retrieving a Held Call
• To retrieve a held call, press the line button where the call is held. When a call is on hold, the line button will blink on and off repeatedly.
Hold Reminder
This feature allows you to program the hold reminder time to remind you that a CO line is still on hold.
1. Press the PROGRAM key.
2. Press the up or down arrow key to scroll to the “Hold Remind” item.
3. Press the right arrow key to select this item.
4. Press the up or down arrow key to select a time value.
5. Press the right arrow key to confirm your selection.
Intercom
The
Predefined Station Select Buttons
After pressing the | button, the Speed Dial buttons become Station |
Select buttons, allowing you to press one of the Speed Dial buttons to contact another extension.
The Station Select buttons are predefined as 11 thru 22 (left to right,
top to bottom). To use these buttons, press the button followed by the Station Select button of the extension you wish to call.
18
