1.Caller ID Scroll - Displays and scrolls through the most recent to the oldest Caller ID. Also, allows the user to scroll left in the program menu after the program button is pressed.
2.LCD Display - The LCD Display shows the calendar when the telephone is idle. The display will also show Caller ID data, numbers dialed, and is used to guide you through system programming.
3.Caller ID Scroll - Displays and scrolls through the oldest to the most recent Caller ID. Also, allows the user to scroll right in the program menu after the program button is pressed.
4.Program Scroll - This allows the user to scroll up through the program menu after pressing the program button. Also, dials the number displayed on the Caller ID by pushing dial.
5.Program Scroll - This allows the user to scroll down through the program menu after pressing the program button. Also, shows Caller ID data of other lines ringing when multiple calls are received.
6.New Call / Message Waiting Indicator This indicator lights solid when there is new Caller ID data. This indicator flashes when there is a message from CO Voice Mail (requires FSK signaling from your local telephone company). LCD will show Message Waiting with Line #.
7.Shift - Accesses the second set of 12 Speed Dial bins. Also, this button is used to access special features.
8.Intercom - Initiates
9.Page - Allows you to broadcast a voice message to 1 or all extensions in the system.
10.Speed Dial Bins - Stores up to 24 telephone numbers. The first 12 are accessible
with a single button press. Press plus the speed dial button to access the last
| 12. |
|
|
11 - 14. Direct CO Line Access buttons - Allows you to access a specific outsideline. | |||
15. | Speakerphone / Headset - Allows you to communicate with outside lines or other | ||
| extensions | button to place | |
| the telephone in headset mode. When in headset mode, this button is used in place | ||
| of the hook switch. |
|
|
16. | Program - Allows you to access the program menu. Use the up and down arrows | ||
| (buttons 4 and 5) to navigate the menu. |
|
|
17. | Erase - Erases individual or all Caller ID data. |
|
|
18. | Hook Switch - When using the handset (not in headset mode), this switch is used to | ||
| disconnect callers. |
|
|
19. | Wall Mount Tab - Holds the handset in the cradle when the telephone is mounted on | ||
| a wall. |
|
|
20. | Speaker - Used for ringing, and speakerphone. |
|
|
21. | Do Not Disturb - Prevents any incoming calls to be heard. When the indicator light | ||
| is on, the telephone is in Do Not Disturb mode. |
|
|
22. | Handset Cord Jack (bottom of telephone) - The handset coil cord, or the splitter coil | ||
| cord, plug into this jack. |
|
|
23. | 2.5mm Headset Jack - This jack is for headsets with a 2.5mm plug. |
| |
24. | Flash - Used to access special telephone company service, like Call Waiting. | ||
25. | Conference – 3 party conference - 2 outside lines or one outside line and extension. | ||
26. | Redial - Allows you to easily call back the last number dialed. Also allows automatic | ||
| redial capability. |
|
|
27. | Mute - Prevents callers from hearing background noises near your telephone. | ||
28. | Hold - Places a call on hold. Calls on hold can be transferred to other extensions. | ||
29 - 30. Volume - Adjusts the volume of the feature that you are currently using. If the | |||
| telephone is idle, the ringer volume is adjusted. |
| |
31. | Line 3 / Line 4 Telephone Jack - 2 Pair (4 conductor) line cord is required when | ||
| plugging into a |
|
|
32. | Line 1 / Line 2 Telephone Jack - 2 Pair (4 conductor) line cord is required when | ||
| plugging into a |
|
|
33. | Data Telephone Jack - Connects to Line 2. Useful for plugging in credit card readers, | ||
| faxes, modems, etc. when Line 2 is connected. |
|
|
34. | 12VDC, 400mA Adapter (supplied) is required5 | to use this telephone. |
|
35. | |||
| level). |
|
|
