Wall Mounting
When wall mounting your telephone, be aware of the following:
• The location where the telephone will be mounted should be away from electrical cables, pipes, or other items which may be punctured when screws are inserted into the wall
• The wall surface should be capable of supporting the telephone weight.
• Use a standard wall phone plate or two screws with anchors.
A Wall Mount Template is provided in the back of this manual for marking the screw locations.
1.Remove the handset from the cradle.
2.Slide the handset catch (below the hook switch) up to remove it from the telephone.
3.Rotate the handset catch a half turn and slide it back into the slot. The handset should now rest on the catch when the telephone is upright for wall mounting.
4.Plug one end of the coil cord into the jack on the back of the phone, and the other end into the handset.
5.Remove the Wall Mounting Adapter by pressing in where indicated in the illustration below.
6.Rotate the Wall Mounting Adapter half way and insert it.
7.Adjust the Viewing Angle Brackets on the left and right side of the telephone to allow the phone to rest flat on the wall.
8.Plug the short telephone cord into the L1/L2 jack on the back of the telephone.
9.Connect the other end of the telephone cord into the jack into the wall telephone outlet.
10.Slip the phone onto the wall mount lining up the wall mounting holes over the wall plate posts or screws. Be sure the short telephone cord is being inserted into the telephone cord channel on the back of the phone.
11.Slide the telephone down so it is firmly in place.
12.Place the handset in the cradle.
13.Plug lines 3 and 4 into the L3/4 jack on the top of the phone.
14.Plug the AC Adapter tip into the ADAPTER jack on the top of the phone. Plug the large end into an AC outlet.
8
