Data Port Anywhere Installation
Step 1. Connect the USB cable on the DPA to your computer USB port. The first time you connect the DPA to your computer, you will be prompted to install USB drivers, simply follow the prompts. The DPA uses standard Microsoft drivers. Follow the prompts to identify the DPA to your operating system.
Step 2. Remove the coiled handset cord from the telephone handset (2A) and insert it into the DPA jack labeled PHONE (2B).
2A | 2B |
Step 3. Connect your PC Card or internal modem cable to the DPA jack labeled MODEM.
The DPA is now installed and ready for use. If you choose to use the telephone handset for voice communications when your modem is not in use see next page.
