Cortelco network adaptor setup guide Level Switch Settings Table

Level Switch Settings Table (Cont.)

Telephone	Telephone	Switch	Notes
Manufacturer	Set Model	Setting
TIE	EX-2260	2	---
	Meritore	2	---
	Onyx	3	---
	TC-22	2	---
	Ultracom CX	2	2
	Keyset 8	2	2
Toshiba	DKT-1000 series	1 or 3	1a
	DKT-2000 series	3	1a
	EKT 2000 series	2	2
	EKT-3000 series	2	1a
	EKT-6000 series	3 or 4	---
	Perception	3	7
	Strata (Key Syst)	2	1a & 2
	Strata (Digital)	1 or 3	1a & 2
	103 series	2 or 3	---
Trillium	Panther	2 or 3	1a & 2
	Talkto 616	2	1a & 2
Vodavi	Electronic Key Sys	---	1b
	Starplus Digital	---	7
Walker	Marathon	1 or 4	---
	Poet	1	1a

NOTES:

1.Custom Factory Settings:

a.The KONEXX product may require a custom factory setting for this phone set. If difficulties are encountered, contact Technical Support at 1 800 275-6354.

b.The KONEXX product requires a custom factory setting to work on these phones. Contact KONEXX Technical Support at 1 800 275-6354

2.Insufficient data is available to determine whether the phone system will support autodialing.

3.The KONEXX product will not support autodial on Model 7300 series telephones.

4.You may have to dial an outside line access number, such as a 9, on the phone before autodialing.

5.Handset Wiring Compatibility:

a.Phone has nonstandard handset wiring and is not compatible with the KONEXX product.

b.Phone has nonstandard handset wiring. The KONEXX product requires the use of a special adapter cable set. Contact Technical Support at

1800 275-6354.

6.When autodialing the user must dial a number on the keypad of the phone after the modem has dialed to maintain the line.

7.These phone systems do not support autodialing.

8.Modem connections limited to 2400 bps by this phone.

9.Teledex telephone is an analog handset and the laptop user may connect directly into the wall jack if the Teledex telephone set does not have a data port.