Unpacking the Mower
Tools & Supplies Needed:
Screwdriver
Knife
Gloves
Eye protection
Metal shears
WARNING! Always wear eye protection when cutting the banding. The banding may have a lot of tension on it and may snap, striking you when cut. Always stand to one side when cutting the band.
1.Stand to one side and cut the banding.
2.Remove the top of the carton. Separate the stapled vertical cardboard ends from the pallet to access the pallet straps. Be careful of the staples.
3.Pry off the fasteners and cut any ties holding the machine to the pallet.
Caution: Wear gloves and be very careful when handling the deck. The blade is very sharp, and may spin as you maneuver the deck.
4.Roll the mower off the pallet. Do not discard your pallet and packaging material until you are fully satisfied with your machine.
5.Remove blade protector from blade. (See caution note above).
Check the Tire Pressure
There should be 10 psi in each tire.
DR SCOUT FIELD and BRUSH MOWER Safety & Operating Instructions | 8 |
