Removing and Replacing the Blade
WARNING! Before performing any maintenance procedure, stop the engine and disconnect the spark plug wire.
Tools Needed:
15/16" wrench or socket Air wrench if available Wear gloves
1 x 4 x 6 to brace the blade
1.Block the blade with a piece of wood between the blade and the skid on the side of the deck. (Figure 16)
2.Remove the blade bolt (right- hand, regular thread) and washer.
Figure 16
WARNING! Use caution when pushing or pulling the wrench next to the blade. Wear gloves, if the wrench slips off the nut, you may be seriously injured.
3.Remove the blade.
4.Mount the new blade, washer and bolt.
Note: Be sure the blade is seated completely over the small ridge in the spindle hub before tightening the lock nut.
21 | DR SCOUT FIELD and BRUSH MOWER Safety & Operating Instructions |