Adjusting the Wheel Clutch
WARNING! Before performing any maintenance procedure, stop the engine and disconnect the spark plug wire.
Note: When properly adjusted, tension on the wheel clutch lever should increase when the lever is about parallel to (almost touching) the handlebar grip.
Tools Needed:
(2) 1/2" wrenches
1.Find the wheel clutch adjustment on the clutch bracket on the underside of the machine. (Figure 17)
2.Loosen the nut on the front (threaded) side of the bracket by 1/8" to 1/4", and then tighten the nut on the back against the bracket. Check the tension on the clutch lever and repeat the adjustment as needed.
WARNING! If clutch is over tightened, machine may lurch forward when shifting into gear. Use caution when shifting into gear.
Wheel Clutch
Adjustment
Figure 17
DR SCOUT FIELD and BRUSH MOWER Safety & Operating Instructions | 22 |
