Chapter 4: Operating Your DR SCOUT FIELD and
BRUSH MOWER
This chapter covers the procedures for starting and stopping your new DR SCOUT FIELD and BRUSH MOWER and discusses basic operation features.
Before Starting the Engine
1.Check the oil level every time you use the machine. (See Figure 2 on page 9)
2.Check the gas level. (Figure 2)
Starting
1.Move the shift lever to N (Neutral) (Figure 3).
2.Move the throttle (Figure 4) to the RUN position.
3.Press the primer pump three times.
4.Turn the key (Figure 4) to START.
5.Grasp the recoil starter handle and slowly pull until you feel resistance. Let the cord retract a little bit, then pull the cord rapidly to start the engine. One or two pulls usually starts the DR® SCOUT™ FIELD and BRUSH MOWER (Figure 4).
Figure 3
Shift Lever
Key |
|
|
|
|
|
Switch |
| Throttle |
| Shift | |
|
| Control |
|
| |
|
|
|
| Lever | |
|
| Starter | |||
|
|
|
| ||
|
|
|
| ||
|
|
|
| Handle |
|
|
|
|
|
|
|
Operator
Presence
Control
Blade Wheel
Clutch Clutch
Primer Pump
Figure 4
DR SCOUT FIELD and BRUSH MOWER Safety & Operating Instructions | 10 |
