CPG #2561255 | FIRELARM 2500 Operating Manual |
Appendix E. Quick Reference Operating
Instructions
FireLarm 2500
Normal Standby | Green AC indicator on. All other indicators off. |
Alarm Conditions | Red zone indicator on. Audible/visual signaling indicator |
| operating |
To Silence Alarm | Do not silence alarm until it has been determined that an |
| emergency situation does not exist (panel must be reset to |
| silence waterflow alarms). Open cover and press . This will |
| also cause the bell trouble indicator to flash. |
To Reset an Alarm | After condition that caused alarm has been corrected, press |
| . |
Trouble Conditions | Yellow SYSTEM TROUBLE indicator and buzzer on. Yellow |
| indicator for specific trouble on (battery, zone, trouble, etc.)` |
Supervisory Condition | Yellow SYSTEM TROUBLE indicator and buzzer on. Yellow |
| SUPERVISORY indicator on (valve closed, low air, low |
| temperature, etc.) |
To Silence Trouble | Open cover and press . The panel automatically restores |
Devices | to normal when the trouble condition has been corrected. |
| Some trouble conditions require pressing for restoration. |
| Note: The problem must be corrected as soon as possible as |
| this may make system inoperative. Contact your service |
| organization if necessary. |
To Test Alarm | Notify building occupants (if a fire department or other |
| monitoring agency, such as a Central Station alarm company, |
| monitors alarms, they must also be notified). Open cover, |
| press and hold for 2 seconds. |
This system should be thoroughly inspected on a regular basis in accordance with the
For Service, Call
Name:
Address:
Telephone:
INSTALLER: FRAME THIS SHEET AND PLACE ADJACENT TO CONTROL PANEL
CPG Signals
2519 4th Ave., P.O. Box 590, Moline, IL 61265
(800)
E
