ATrACHING VAC HOSE TO THE DUAL DUST PORT ADAPTER cont.

NOTE: A standard 11/4-in. vac hose connection fits i,lside the smaller diameter hole inside the dual dust port adapter, while a standard 21/2-in. vac hose connection fits inside the larger hole of the dual dust port adapter

/_ WARNING: When sander is not connected to vacuum, always install the Cyclonics dust box back on sander. Failure to do so could cause sanding dust

or foreign objects to be thrown into the face or eyes, which could result in possible serious injury.

Z_ WARNING: Collected sanding dust from sanding surface coatings (polyurethane, linseed oil, etc.) can self-ignite in sander dust box or elsewhere

and cause fire. To reduce risk, empty dust box frequently and strictly follow sander manual and coating manufacturer's instructions.

/_ CAUTION: When working on metal surfaces, DO NOT use the dust box or a vacuum cleaner because sparks are generated. Wear safety glasses and a dust mask. Due to the danger of fire, do not use your sander to sand magnesium surfaces. Do not use for wet sanding.

J

I

Before attempting to use any tool, be sure to familiarize yourself with all the operating features and safety instructions.

/_, WARNING: IF ANY PARTS ARE MISSING, DO NOT OPERATE YOUR SANDER UNTIL THE MISSING PARTS ARE REPLACED. FAILURE TO FOLLOW THIS RULE COULD RESULT IN SERIOUS PERSONAL INJURY.

I Z WARNING:

DO NOT let

with your sander make you careless.

I

Remember that a careless fractionfamiliarityof second is sufficient to cause severe injury.

 

ON/OFF ROCKER SWITCH (see Fig. 6)

This switch is sealed to help keep out dust for a longer life and is conveniently located near the front of the palm grip handle.

Start the sander by pushing in the part of the switch with the [----].Let the motor build to its

maximum speed before starting sanding operation. To turn sander off, push side of switch with the [].

16

Page 16
Image 16
Craftsman 172.27673 operating instructions