WARNING: Your sander should NEVER be connected to the power source when you are assembling parts, making adjustments, installingor removing

sandpaper, cleaning or when it is not in use. Disconnecting the sander will prevent accidental starting, that could cause serious personal injury.

INSTALLING THE SANDPAPER (See Fig. 3)

ALWAYS inspect the sandpaper before installing. DO NOT use if broken or defective. 1. Unplug the sander.

I startingZ WARNING:causing possibleFailureseriousto unplugpersonalthe sanderinjurycould. result in accidental

NOTE: Remove cyclonic dust box assembly when installingsandpaper. ALWAYS remember to reattach the cyclonic dust box assembly before beginning sanding operation (see page 14, Fig. 4).

2. Align the holes in the sanding disc with the holes in the hook and loop backing pad.

ItheOTE:dustHolescollectioninsandingfeaturediscofthemustsanderlineupto withfunctionholesproperlyinthe backing. pad in order for

3.Press the sanding disc against the backing pad as firmly as possible.

JsandingNOTE:Fordiscbestbackingadhesion,occasionallywerecommendbybrushingthatthemyoudeanlightlythewithbackingsmallpadbrushand. the

Fig 3

5-in.

Hook and Loop

Backing Pad

I

I

I

5-in. Hook and Loop Sanding Disc with Pre-Punchedholes

13

Page 13
Image 13
Craftsman 172.27673 operating instructions