Craftsman 315.11534, 350 manual Knowyourdrill-Driver, See Figure

KNOWYOURDRILL-DRIVER

See Figure 1.

Before attempting to use this product, familiarizeyourself with all operating features and safety rules.

BIT STORAGE

Bits provided with the drill-drivercan be placed in the storagearea, located on the base of the drill.

DIRECTION OF ROTATION SELECTOR (FORWARD/REVERSE/CENTER LOCK)

Your drill-driverhas a direction of rotation(forward/reverss/ centei"lock) selector located above the switch _ggar for

changing the direction of bit rotation. Setting the switch trigger in the OFF (center lock) position helps reduce the possibilityof accidentalstarting when not in use.

KEYLESS CHUCK

"me keylass chuck allows you to hand-tighten or release the drill bit in the chuck jaws.

UNPACKING

This producthas been shipped eompiatsly assembled.

•Carefulfyremove the tool and any accessoriesfTomthe

box. Make sure that a_litems listed in the packing list are included.

•Inspect the too[ carefullyto make sure no breakage or damage occurred dunng shipping.

•Do not discard the packing material until you have carefully inspected and setistactoril¥ operated the tool.

•If any parts are damaged or missing, please call 1-800-932-3188 for ase'_tance.

PACKING UST

Drill-Driver

Battery Pack (2)

Charger

Double-ended Bits (2I

Carrying Case

Operator'sManual

LED WQRKLIGHT

The LEDworPJight,located on the front of the tool base, illuminateswhen the switch _'iggarts depressed.This providesextra light for inoreased yisibility.

LEVEL

A level is located on the top of the motor housingto help you keep the drill bit level during use;

TORQUE AI0klMSTMENT RING

Yourdrill-driverhas a 24-position clutch.The torque adjustment ring can be turnedto select the right amount

of torque for your application.

VARIABLE SPEED

The variablespeed switch triggar delivers higher speed with increased ttlgger pressureand lower speed with de- ,teasedtriggerpressure.

,P=

41L WARNING: If any parts are missingdo not operate this tool untilthe missingparts are replaced. Failure to do so could resultin possible seriouspersonal injury.

A WARNING: Do not attempt to modify this tool or create accessories not recommended for use

with this tool. Any such alterationor modification is misuse arid coutdresul_in s h_.ardous condition

leadingto possibleserious personalir(ury.

_1_ WARNING: To preventaccidental startingthat could cause serious persenaf injury, a_,ays remove

the battery pack _om the too[ when assembling parts.