Craftsman 315.11534, 350 manual g - 12 For ddving screws into soft and hard materials

ADJUSTABLE TORQUE CLUTCH

The drill ls equipped with an adjustable torque clutch for driving different types of screws into differentmaterials. The proper setting depends on the type of material and the size of sorew you are using.

ADJUSTING TORQUE

See Ftgure 6.

•There are Lwenty-fourtorque indicatorsettings located on the _TO_ofthe drill.

•Rotate the adjusting ring to the desired setting.

•1 - 4 For drivingsmed[screws

•5 - 8 For drivingscrews into soft

materia_

•g - 12 For ddving screws into soft and hard materials

•13 - 16 For drivingscrews into hardwood

=17 - 23 For driving large screws

• 4U For heavy drifting

TODECREASE ADJUSTING

TORQUER/NO

LED WORKLIGHT

See F/gum 7.

The LED workJighton the foot of the drillwill come on when the switch _'iggerie depressed.This providesaddi- tional lightingon the surface of the workpieoefor opera- Lion in lower-lightareas.

LED

WORKLIGHT

Fig. 7

TOIXCREASE TORQUE _,

Bff STORAGE

See Figure 8.

When not in use, bits providedwith the drill can be placed in t_e storage area located on the base of the driU.

	SCREWDRIVERBIT(S)
Fig. 6	\

BIT

AREA

13