![](/images/new-backgrounds/1195916/19591621x1.webp)
KNOW YOUR SNOW THROWER
READ THIS OWNER'S MANUAL AND SAFETY RULES BEFORE OPERATING
YOUR SNOW THROWER. Compare the illustrations with your SNOW THROWER to familiarize yourself with the location of various controls and adjustments. Save this manual for future reference.
| Auger | Traction | Drive Lever | |
Electric | Drive Lever |
| (left hand) | |
Start | (right hand) |
| , Remote | |
Button |
|
| ||
Primer |
|
| Chute | Control |
|
| Lever | Crank | |
nition Bu | Switch |
| ||
|
|
|
Assembly
Discharge
Chute
Choke |
|
|
|
Control Throttle | Recoil | Height |
|
Starter | Adjust |
| |
Control | Handle | Skid | Figure 10 |
|
|
|
Auger Drive Lever - Starts and stops
the auger and impeller (snow gathering and throwing)
Traction Drive Lever - Propels the snow thrower forward and in reverse.
Speed Shifter Lever - Selects the speed of the snow thrower (6 speeds for- ward and 2 speeds reverse).
Crank Assembly - Changes the direction of snow throwing through the discharge chute.
Chute Deflector - Changes the distance the snow is thrown.
Discharge Chute - Changes the height and direction the snow is thrown.
Choke Control - Used to start a cold
engine.
Primer Button - Injects fuel directly into the carburetor manifold for fast starts in cold weather.
Remote Chute Control Lever - Push
forward to discharge snow high and far. Pull remote lever back to discharge snow
down.
Throttle Control - Controls the engine
speed.
Electric Start Button - (if so equipped)
Used to start the engine using the 120 V elec- tric starter.
Height Adjust Skid - Adjusts the ground clearance of the auger housing. ignition Key - Must be inserted to start the engine.
Recoil Starter Handle - Starts the en- gine manually.
Shear Pin
iect becomes lodged in the aguer hous- ing.
Toolbox
11 |