Manuals / Craftsman / Lawn and Garden / Snow Blower

Craftsman 536.88626 operating instructions Snow Throwing Tips

Models: 536.88626

1 54
Download 54 pages 9.11 Kb
Page 16
Image 16

2.Release the starter handle and let it snap back against the starter.

If the engine still fails to start, repeat the two previous steps until the engine starts. Then continue with the direc- tions for cold start.

To help prevent possible freeze-up of

recoil starter and engine controls, pro- ceed as follows after each snow remov-

al job.

1.With the engine running, pull the

starter rope hard with a continuous full arm stroke three or four times.

Pulling of starter rope will produce a loud clattering sound. This is not harmful to the engine or starter.

2.With the engine not running, wipe all snow and moisture from the carbu-

retor cover in area of control levers. Also move throttle control, choke cofltrot, and starter handle several times.

gine indoors or in enclosed,

,_ WARNING: Never run en- poorly ventilated areas. En-

gine exhaust contains CARBON MONOXIDE, AN ODORLESS AND DEADLY GAS. Keep hands, feet, hair and loose clothing away from

any moving parts on engine and snow thrower.

The temperature of muffler and nearby areas may exceed 150°F. Avoid these areas.

DO NOT allow children or young teenagers to operate or be near snow thrower while it is operating.

to remove any item that may

_b ARNING: Do not attempt become lodged in auger

without taking the following precau- tions:

•Release auger drive lever.

•Move throttle lever to stop posi- tion.

•Remove (do not turn) ignition key.

Disconnect spark plug wire. Do not place your hands in the auger or discharge chute. Use a pry bar.

SNOW THROWING TIPS

1.For maximum snow thrower efficien-

cy in removing snow, adjust ground speed, NEVER the throttle. Go slower in deep, freezing or wet snow. If the wheels slips, reduce forward speed. The engine is de- signed to deliver maximum perfor- mance at full throttle and should be run at this power setting at all times.

2.Most efficient snow throwing is ac- complished when the snow is re- moved immediately after if falls.

3.For complete snow removal, slightly overlap each path previously taken.

4.The snow should be discharged down wind whenever possible.

5.For normal usage, set the skids so that the scraper bar is 1/8" above the skids. For extremely hard- packed snow surfaces, adjust the skids upward so that the scraper bar touches the ground.

6.On gravel or crushed rock surfaces, set the skids at 1-1/4" below the scraper bar. See To Adjust Skid Height paragraph in the Service &

Adjustments section of this manu- al. Rocks and gravel must not be

picked up and thrown by the ma- chine.

. After the snow throwing job has been completed, allow the engine to idle for a few minutes, which will melt snow and accumulated ice off

the engine.

. Clean the snow thrower thoroughly after each use.

9.Remove ice and snow accumulation and all debris from the entire snow thrower, and flush with water (if pos- sible) to remove all salt or other chemicals. Wipe snow thrower dry.

F-001088J16

Page 15 Page 17
Page 16
Image 16
Craftsman 536.88626 operating instructions Snow Throwing Tips
Page 15 Page 17

536.88626 specifications

The Craftsman 536.88626 is a versatile snowblower designed to tackle winter's greatest challenges. Perfect for homeowners looking to keep their driveways, walkways, and patios clear, this model boasts a combination of power, efficiency, and user-friendly features.

One of the standout characteristics of the Craftsman 536.88626 is its powerful engine. It typically features a robust gas engine, capable of producing ample torque to handle heavy, wet snow with ease. This ensures that users can rely on the snowblower to tackle the toughest winter conditions without significant effort. The engine's reliability is complemented by a reliable starting system, making the machine easy to operate in cold temperatures.

Another notable feature of this snowblower is its clearing width and intake height. The Craftsman 536.88626 usually comes equipped with a substantial clearing width, often around 24 inches, allowing it to cover large areas more efficiently. The impressive intake height ensures that it can scoop up deeper snow without clogging, making it suitable for varying snow conditions, from light flurries to heavy snowfall.

The snowblower is also designed with user comfort in mind. It typically includes an adjustable handle, allowing operators of different heights to use it comfortably. Moreover, heated hand grips may be available on some models, providing added comfort during extended use in frigid temperatures.

Technology is at the forefront of this machine's design, featuring a six-speed transmission system. This allows users to select the ideal speed for their snow removal tasks, whether they need to move quickly over paved areas or take their time on uneven terrain. The easy-to-use chute control lets users direct the snow where they want it, helping to create clean paths without unnecessary snow buildup.

Maintenance is also simplified with the Craftsman 536.88626. It typically comes with easy-access components, enabling users to perform routine checks and repairs without hassle. The durable construction materials are designed to withstand harsh winter conditions, ensuring longevity and reliability.

In summary, the Craftsman 536.88626 stands out in the snowblower market with its powerful engine, efficient clearing capability, and user-centric features. Whether facing a light dusting or a heavy snowfall, this machine is designed to make snow removal quick, easy, and efficient, making it a valuable tool for winter weather preparedness.