TRAINING

1.Read the operating and service instruction manual carefully. Be thoroughly familiar with the controls and the proper use of the equipment. Know how to stop the unit and disengage the controls quickly.

2.Never allow children to operate the equip- ment. Never allow adults to operate the equipment without proper instruction.

3.Keep the area of operation clear of all per- sons, particularly small children and pets.

4.Exercise caution to avoid slipping or falling especially when operating in reverse.

PREPARATION

1.Thoroughly inspect the area where the equipment is to be used and remove all doormats, sleds, boards, wires, and other foreign objects.

2.Disengage all clutches before starting the engine (motor).

3.Do not operate the equipment without

wearing _adequate winter outer garments. Wear footwear that will improve footing on

slippery surfaces.

4.Handle fuel with care; it is highly flam- mable.

a.Use an approved fuel container.

b.Never remove fuel tank cap or add fuel to a running engine (motor) or hot en- gine (motor).

c.Fill fuel tank outdoors with extreme care. Never fill fuel tank indoors.

d.Replace fuel cap securely and wipe up spilled fuel.

e.Never store fuel or snow thrower with fuel in the tank inside of a building where fumes may reach an open flame or spark.

f.Check fuel supply before each use, al- lowing space for expansion as the heat of the engine (motor) and/or sun can cause fuel to expand.

5.For all units with electric starting motors use electric starting extension cords certi- fied CSA/UL. Use only with a receptacle that has been installed in accordance with local inspection authorities.

6.Adjust the snow thrower height to clear gravel or crushed rock surface.

7.Never attempt to make any adjustments while the engine (motor) is running (except when specifically recommended by manu- facturer).

8.Let engine (motor) and snow thrower ad- just to outdoor temperatures before starting to clear snow.

g.Always wear safety glasses or eye shields during operation or while performing an ad- justment or repair to protect eyes from

foreign objects that may be thrown from the snow thrower.

OPERATION

1.Do not operate this machine it you are tak- ing drugs or other medication which can cause drowsiness or affect your ability to operate this machine.

2.Do not use this machine if you are mentally or physically unable to operate this ma- chine safely.

3.Do not put hands or feet near or under ro- tating parts. Keep clear of the discharge opening at all times.

4.Exercise extreme caution when operating on or crossing gravel drives, walks or roads. Stay alert for hidden hazards or traffic.

5.After striking a foreign object, stop the en- gine (motor), remove the wire from the spark plug, thoroughly inspect snow thrower for any damage, and repair the

damage before restarting and operating the snow thrower.

6.If the unit should start to vibrate abnormal- ly, stop the engine (motor) and check im- mediately for the cause. Vibration is generally a warning of trouble.

7.Stop the engine (motor) whenever you leave the operating position, before un- clogging the auger/impeller housing or dis- charge chute and when making any repairs, adjustments, or inspections.

8.When cleaning, repeidng, or inspecting, make certain the auger/impeller and all moving parts have stopped and all controls are disengaged. Disconnect the spark plug wire and keep the wire away from the spark plug to prevent accidental starting.

9.Take all possible precautions when leaving the snow thrower unattended. Disengage the auger/ impeller, stop engine (motor), and remove key.

10.Do not run the engine (motor) indoors, ex- cept when starling the engine (motor) and for transporting the snow thrower in or out of the building. Open the outside doors; ex- haust fumes are dangerous (containing CARBON MONOXIDE, an ODORLESS and DEADLY GAS).

11.Do not clear snow across the face of slopes. Exercise extreme caution when changing direction on slopes. Do not at- tempt to clear steep slopes.

12.Never operate the snow thrower without proper guards, plates or other safety pro- tective devices in place.

F--001088J3

Page 2 Page 4
Page 3
Image 3
Craftsman 536.88626 operating instructions Training, Preparation
Page 2 Page 4

536.88626 specifications

The Craftsman 536.88626 is a versatile snowblower designed to tackle winter's greatest challenges. Perfect for homeowners looking to keep their driveways, walkways, and patios clear, this model boasts a combination of power, efficiency, and user-friendly features.

One of the standout characteristics of the Craftsman 536.88626 is its powerful engine. It typically features a robust gas engine, capable of producing ample torque to handle heavy, wet snow with ease. This ensures that users can rely on the snowblower to tackle the toughest winter conditions without significant effort. The engine's reliability is complemented by a reliable starting system, making the machine easy to operate in cold temperatures.

Another notable feature of this snowblower is its clearing width and intake height. The Craftsman 536.88626 usually comes equipped with a substantial clearing width, often around 24 inches, allowing it to cover large areas more efficiently. The impressive intake height ensures that it can scoop up deeper snow without clogging, making it suitable for varying snow conditions, from light flurries to heavy snowfall.

The snowblower is also designed with user comfort in mind. It typically includes an adjustable handle, allowing operators of different heights to use it comfortably. Moreover, heated hand grips may be available on some models, providing added comfort during extended use in frigid temperatures.

Technology is at the forefront of this machine's design, featuring a six-speed transmission system. This allows users to select the ideal speed for their snow removal tasks, whether they need to move quickly over paved areas or take their time on uneven terrain. The easy-to-use chute control lets users direct the snow where they want it, helping to create clean paths without unnecessary snow buildup.

Maintenance is also simplified with the Craftsman 536.88626. It typically comes with easy-access components, enabling users to perform routine checks and repairs without hassle. The durable construction materials are designed to withstand harsh winter conditions, ensuring longevity and reliability.

In summary, the Craftsman 536.88626 stands out in the snowblower market with its powerful engine, efficient clearing capability, and user-centric features. Whether facing a light dusting or a heavy snowfall, this machine is designed to make snow removal quick, easy, and efficient, making it a valuable tool for winter weather preparedness.
Top Page Image Contents