Craftsman 536.88626 Pulley is properly aligned with the traction drive belt, Traction DriveAuger

Models: 536.88626

1 54
Download 54 pages 9.11 Kb
Page 23
Image 23

. Remove the old auger drive belt.

Replace the auger drive belt with

an original factory replacement belt available from an authorized service

center.

9.install the new auger drive belt onto the auger drive pulley and onto the drive pulley,

10.Adjust the auger drive belt. See "How To Adjust The Auger Drive

Belt" in the Service And Adjustment section.

11.Adjust the belt guide. See "How To Adjust The Belt Guide" in the Ser- vice And Adjustment section.

12.Install the bolts on each side of the motor mount frame. See

Figure 25.

13.Tighter_the bolts on each side of the motor mount frame.

14.Install the belt cover. Tighten the screw. See Figure 22.

15.Check the adjustment of the cables. See "How To Check And Adjust The

Cables" in the Service And Adjust- ment section.

16.Connect the spark plug wire.

How To Remove the Traction Drive Belt

If the snow thrower will not move for- ward, check the traction drive belt for wear or damage. If the traction drive belt is worn or damaged, replace the belt as follows.

1.Remove the gas from the gas tank. Stand the snow thrower up on the front end of the auger housing.

outdoors, away from fire or

_ARNING: Drain the gasoline flame.

2.Disconnect the spark plug wire.

3.Remove the auger drive belt. See "How To Remove The Auger Drive Belt" in the Maintenance section.

4.Pull the traction drive idler pulley away from the traction drive belt. See Figure 26.

Traction Drive Belt

Auger Drive

Traction

Belt Guide

Drive Pulley

Auger

Drive

Pulley

Traction

DriveAuger

IdlerIdler

PulleyPulley

Engine Pulley

Figure 26

. Remove the old traction drive belt from the traction drive pulley and from the engine pulley. Replace the traction drive belt with an original

factory replacement belt available from an authorized service center.

. Install the new traction drive belt onto the traction drive pulley and onto the engine pulley.

. Make sure the traction drive idler

pulley is properly aligned with the traction drive belt.

. Install and adjust the auger drive belt. See "How To Remove The Au-

ger Drive Belt" in the Service And Adjustment section.

. Adjust the belt guide. See "How To Adjust The Belt Guide" in the Ser- vice And Adjustment section.

10.Install the bolts on each side of the motor mount frame. See Figure 25.

11.Tighten the bolts on each side of the motor mount frame.

12.Install the belt cover. Tighten screw. See Figure 22.

13.Check the adjustment of the cables. See "How To Check And Adjust The

Cables" in the Service And Adjust- ment section.

14.Connect the spark plug wire.

F-001088J23

Page 23
Image 23
Craftsman 536.88626 operating instructions Pulley is properly aligned with the traction drive belt, Traction DriveAuger

536.88626 specifications

The Craftsman 536.88626 is a versatile snowblower designed to tackle winter's greatest challenges. Perfect for homeowners looking to keep their driveways, walkways, and patios clear, this model boasts a combination of power, efficiency, and user-friendly features.

One of the standout characteristics of the Craftsman 536.88626 is its powerful engine. It typically features a robust gas engine, capable of producing ample torque to handle heavy, wet snow with ease. This ensures that users can rely on the snowblower to tackle the toughest winter conditions without significant effort. The engine's reliability is complemented by a reliable starting system, making the machine easy to operate in cold temperatures.

Another notable feature of this snowblower is its clearing width and intake height. The Craftsman 536.88626 usually comes equipped with a substantial clearing width, often around 24 inches, allowing it to cover large areas more efficiently. The impressive intake height ensures that it can scoop up deeper snow without clogging, making it suitable for varying snow conditions, from light flurries to heavy snowfall.

The snowblower is also designed with user comfort in mind. It typically includes an adjustable handle, allowing operators of different heights to use it comfortably. Moreover, heated hand grips may be available on some models, providing added comfort during extended use in frigid temperatures.

Technology is at the forefront of this machine's design, featuring a six-speed transmission system. This allows users to select the ideal speed for their snow removal tasks, whether they need to move quickly over paved areas or take their time on uneven terrain. The easy-to-use chute control lets users direct the snow where they want it, helping to create clean paths without unnecessary snow buildup.

Maintenance is also simplified with the Craftsman 536.88626. It typically comes with easy-access components, enabling users to perform routine checks and repairs without hassle. The durable construction materials are designed to withstand harsh winter conditions, ensuring longevity and reliability.

In summary, the Craftsman 536.88626 stands out in the snowblower market with its powerful engine, efficient clearing capability, and user-centric features. Whether facing a light dusting or a heavy snowfall, this machine is designed to make snow removal quick, easy, and efficient, making it a valuable tool for winter weather preparedness.