Craftsman 536.88626 Product Specifications, AS Required, LUBRICATION-EVERY 25 Hours

Models: 536.88626

1 54
Download 54 pages 9.11 Kb
Page 18
Image 18

PRODUCT SPECIFICATIONS

HORSEPOWER

9 HP

 

DISPLACEMENT

19.34 cu. in.

GASOLINE

4 quarts

 

CAPACITY

(unleaded)

 

OIL CAPACITY

5W30

 

20 oz capacity)

 

 

;PARK PLUG:

Champion

RJ19LM

 

(Gap .030

in.) or

 

equivalent

 

VALVE CLEARANCE: Intake: .010 In.

 

Exhaust:

.010 In.

SNOW THROWER

AS REQUIRED

The following adjustment should be preformed more than once each sea- son.

1.Auger drive belt should be adjusted after the first 2 to 4 hours of use, again about mid-season and twice each season thereafter (See to Ad- just Belts paragraph in the Ser- vice and Adjustment section).

LUBRICATION-EVERY 25 HOURS

Lubricate Disc Drive Plate every

twenty-five (25) hours and at the end of the season and/or before storage.

To Lubricate

1.Position speed selector lever in first gear.

2.Stand the snow thrower up on the auger housing end.

3.Remove the bottom panel.

4.Turn disc drive plate clockwise by hand until grease zerk is clearly visible at front center. See

Figure 16.

5.Place a coin or (a shim of equal thickness) between the rubber fric- tion wheel and disc drive plate to

prevent rubber friction wheel con- tacting the drive disc plate.

6.To grease zerk, use a hand grease gun, lubricate with a Hi Temp EP Moly grease. Fill zerk only until grease becomes visible below bear- ing assembly located under grease zerk. DO NOT over fill.

CAUTION: DO NOT allow grease to come in contract with the disc drive

plate or friction wheel or damage will result.

IMPORTANT: Remove coin and en- sure that a gap exists between friction wheel and disc drive plate.

NOTE: Clean all excess grease found on friction disc hub.

Sprockets Hex Shaft and Sprockets

(Require No

Lubrication

Friction

Wheel

Disc

Drive

Plate

Friction

 

Bearing

 

heel

in or

Shim

Point at which

 

begreasevisibleshould

,_

Gap

Between

 

 

Friction Wheel

 

C_

and Disc Drive

 

 

Plate

 

Grease Zerk

Figure 16

 

LUBRICATION-NOT REQUIRED

1.Hex Shaft and Sprockets- Hex shaft and sprockets require no lu- brication. All bearings and bushings are lifetime lubricated and require no maintenance, See Figure 16.

NOTE: Any greasing or oiling of the

above components can cause contami- nation of the friction wheel. If the disc

F-001088J18

Page 18
Image 18
Craftsman 536.88626 Product Specifications, AS Required, LUBRICATION-EVERY 25 Hours, LUBRICATION-NOT Required

536.88626 specifications

The Craftsman 536.88626 is a versatile snowblower designed to tackle winter's greatest challenges. Perfect for homeowners looking to keep their driveways, walkways, and patios clear, this model boasts a combination of power, efficiency, and user-friendly features.

One of the standout characteristics of the Craftsman 536.88626 is its powerful engine. It typically features a robust gas engine, capable of producing ample torque to handle heavy, wet snow with ease. This ensures that users can rely on the snowblower to tackle the toughest winter conditions without significant effort. The engine's reliability is complemented by a reliable starting system, making the machine easy to operate in cold temperatures.

Another notable feature of this snowblower is its clearing width and intake height. The Craftsman 536.88626 usually comes equipped with a substantial clearing width, often around 24 inches, allowing it to cover large areas more efficiently. The impressive intake height ensures that it can scoop up deeper snow without clogging, making it suitable for varying snow conditions, from light flurries to heavy snowfall.

The snowblower is also designed with user comfort in mind. It typically includes an adjustable handle, allowing operators of different heights to use it comfortably. Moreover, heated hand grips may be available on some models, providing added comfort during extended use in frigid temperatures.

Technology is at the forefront of this machine's design, featuring a six-speed transmission system. This allows users to select the ideal speed for their snow removal tasks, whether they need to move quickly over paved areas or take their time on uneven terrain. The easy-to-use chute control lets users direct the snow where they want it, helping to create clean paths without unnecessary snow buildup.

Maintenance is also simplified with the Craftsman 536.88626. It typically comes with easy-access components, enabling users to perform routine checks and repairs without hassle. The durable construction materials are designed to withstand harsh winter conditions, ensuring longevity and reliability.

In summary, the Craftsman 536.88626 stands out in the snowblower market with its powerful engine, efficient clearing capability, and user-centric features. Whether facing a light dusting or a heavy snowfall, this machine is designed to make snow removal quick, easy, and efficient, making it a valuable tool for winter weather preparedness.