Orion G42110 owner manual CEA Specifications, Output Plate, Figure Figura Abbildung

8.Rear Hi-Pass Crossover Frequency Control - adjusts the frequency of the rear chan- nels Hi-Pass crossover..

9.Rear Lo-Pass Crossover Frequency Control - adjusts the frequency of the rear channels Lo-Pass crossover..

10.Rear LPF, FULL, HPF Switch - selects either Lo-pass crossover, Full range or Hi-Pass crossover for rear channels..

11.Rear Gain Control - continuously adjusts from 250mV to 5V for full rear channel output power..

12.RCA Rear Inputs - accepts RCA input from the Rear channels of a source unit..

13.Status LED - Will indicate any fault condition in amplifier, also lights briefly during muting phase of turn-on..

14.Front Hi-Pass Crossover Frequency Control - adjusts the frequency of the front channels Hi-Pass crossover..

15.Rear Variable Bass Control - Adjust bass gain on rear channels from 0dB to +8dB..

1 2 2 3 4 5

Figure 2

Figura 2

Abbildung 2

Output Plate

1.Speaker Connections - accepts up to 12 AWG speaker wire..

2.2 ATC Fuses - protects the amplifier from over current situations..

3.Power Connections - accepts up to 4 AWG power cables..

4.REM Remote Turn-on Input - turns on the amplifier when fed 12 V+..

4.Ground Connection - accepts up to 4 AWG ground cable..

CEA Specifications

CO600..4

Power Output: 60 Watts RMS x 4 at 4 ohms and < 1% THD+N

Signal to Noise Ratio: -70 dBA (reference 1 Watt into 4 ohms)

Addition Power: 75 Watts RMS x 4 at 2 ohms and < 1% THD+N

© 2007 directed electronics—all rights reserved