HIGH LEVEL HARNESSES
Do not connect the high level input connections to power, signal, or chassis ground as damage to the
HIGH LEVEL CONNECTIONS
WIRE COLOR | INPUT CONNECTION |
|
|
Black | Ground |
|
|
White | + Left Front channel |
|
|
White/Black | - Left Front channel |
|
|
Green/Black | - Right Rear channel |
|
|
Green | + Right Rear channel |
|
|
Gray | + Right Front channel |
|
|
Gray/Black | - Right Front channel |
|
|
Violet/Black | - Left Rear channel |
|
|
Violet | + Left Rear channel |
|
|
Amplifier Settings
Signal Input and Output Configurations
The input section of the amplifier consists of a 2 CH / 4 CH switch that sets the output configura- tion, gain controls, and RCA inputs.. The input section makes it easy to adapt this amplifier to most system configurations..
Input Gain
The Orion Cobalt CO600..4 amplifiers have level adjustments to allow for easy integration with any source unit.. The input sensitivity can be adjusted from 250mV to 5V.. Refer to Testing the System and Adjusting the Sound of the System sections of this guide for detailed instructions on setting the gain..
Internal Crossover
The crossover section of the Orion Cobalt CO600..4 amplifiers is continuously variable and extremely flexible..
When using Orion Cobalt loudspeakers, minor deviations from the recommended frequency ranges can provide superior results depending on your speaker locations and your vehicle acoustics.. Setting crossover frequencies higher than recommended will not cause damage and may provide superior sonic results depending on your system's performance goals.. Refer to your loudspeaker owner's manual for assistance in choosing the proper crossover frequencies for your system..
Low-Pass Crossover
The
© 2007 directed | 5 |
