Paso 4.. Gire el control de volumen de la unidad fuente hasta su mayor nivel de salida sin distorsión.. Si no tiene equipo de prueba, este punto debe estar entre tres cuartos y el máximo de volumen, dependiendo de la calidad de la unidad fuente.. Vea si hay distorsión audible.. Si oye distorsión, reduzca el volumen de la unidad fuente hasta que la salida pierda la distorsión.. Deje el control de volumen en esta posición mientras ajusta el sistema..

Paso 5.. Escuchando la música dinámica escogida, suba el control de nivel correspondiente a la salida de frecuencias medias hasta que oiga una ligera distorsión y luego baje levemente el control de nivel hasta que la distorsión desaparezca.. Dependiendo del sistema, la salida de altavoz de frecuencias medias y de tweeter puede estar en los mismos canales de salida..

Paso 6.. Suba el control de nivel correspondiente a la salida de tweeter hasta que oiga una ligera distorsión y luego baje levemente el control de nivel hasta que la distorsión desaparezca.. Dependiendo del sistema, la salida de altavoz de frecuencias medias y de tweeter puede estar en los mismos canales de salida..

Paso 7.. Haga ajustes menores al nivel de salida entre las frecuencias medias y los tweeters.. Consulte la sección Crossover interno de este manual para ver instrucciones detal- ladas..

Paso 8.. Repita los pasos 5 a 7 con los altavoces traseros.. Si no tiene altavoces traseros, continúe con el paso 10..

Paso 9.. Fije los niveles entre los altavoces de frecuencias medias y los tweeters delanteros y traseros para lograr un equilibrio delantero/trasero óptimo..

Paso 10.. Gire el control de nivel correspondiente a la salida de woofer hasta que oiga una ligera distorsión y luego baje levemente el control de nivel hasta que la distorsión desaparezca..

Paso 11.. Haga ajustes menores al nivel de salida entre los altavoces satélite y los woofers.. Consulte la sección Crossover interno de este manual para ver instrucciones detal- ladas..

Paso 12.. Disfrute de su maravilloso sistema de sonido Orion Cobalt..

© 2007 directed electronics—all rights reserved

31

Page 32
Image 32
Orion G42110 owner manual Directed electronics-all rights reserved

G42110 specifications

The Orion G42110 is a robust and versatile unmanned aerial vehicle (UAV) designed primarily for a range of commercial and military applications. Renowned for its advanced capabilities, the G42110 integrates state-of-the-art technologies, making it an ideal choice for surveillance, reconnaissance, and various environmental monitoring efforts.

One of the standout features of the Orion G42110 is its impressive flight endurance. With a maximum range of over 1,000 kilometers and the ability to stay aloft for up to 24 hours, this UAV allows for extended missions without the need for frequent refueling or landings. This extended range positions it as an effective tool for long-duration monitoring operations, whether over land or water.

The G42110 is equipped with a high-performance propulsion system that combines a quiet, fuel-efficient engine with cutting-edge aerodynamics. This technology not only enhances the UAV's maneuverability but also reduces its acoustic signature, enabling discreet operations in sensitive areas. The fuselage design contributes to reduced drag and improved operational efficiency, fostering an optimal blend of speed, stability, and stealth.

In terms of payload capacity, the Orion G42110 can accommodate a variety of sensors and equipment, including electro-optical and infrared cameras, synthetic aperture radar (SAR), and signals intelligence (SIGINT) systems. This adaptability allows operators to customize missions to meet specific needs, whether for search and rescue, disaster response, or agricultural monitoring.

The vehicle's avionics suite is equipped with advanced autopilot systems and flight control technologies that facilitate autonomous operation. Pilots can easily program flight paths, allowing for consistent and repeatable missions. Furthermore, real-time data transmission capabilities enable operators to receive immediate situational awareness and quickly make informed decisions in the field.

Durability is another hallmark of the G42110. Built with high-strength composite materials, the UAV is designed to withstand harsh environmental conditions, ensuring reliable performance even in challenging weather scenarios. Its rugged construction enhances its longevity and reduces maintenance costs.

In summary, the Orion G42110 stands out as a versatile UAV that combines long endurance, advanced technologies, and adaptability to various mission profiles. With its exceptional payload capacity, low-observability features, and autonomy, this unmanned aerial vehicle represents a significant advancement in UAV technology, catering to the needs of diverse sectors from military to civilian applications. As industries continue to explore the possibilities of drones, the Orion G42110 is poised to play a pivotal role in modern aerial operations.