Craftsman 79585 manual Instructions, Tools Requiredfor Assembly

ASSEMBLY

r" 3

Flat ---=-//_

Washer 1_ _

5/16" I.D.

_,.--Hex Lock

Nut 5/16-18

Thread

Hex Bolt

5/16-18 x 8-3/8" Long

INSTRUCTIONS

IMPORTANT: This unit is shipped WITHOUT GASO- LINE or OIL in the engine. After assembly, see opera- tion section of this manual for proper fuel and engine oil recommendations.

NOTE: To determine right and left hand sides of your

chipper-shredder, stand behind the unit with the engine the farthest away from you. See figure 6.

Your chipper-shredder has been completely assem- bled at the factory, except for the hopper assembly (hopper hood and upper leaf ramp section have been

sub-assembled), upper guide assembly, chute deflector and the catcher bag. The hardware pack

safety glasses and a bottle of oil are also included in the carton.

The hardware pack contains the parts shown in figure 1 (shown full size).

TOREMOVECHIPPER-SHREDDERFROMCARTON

Cut the corners of the carton. Remove all packing inserts. Roll chipper-shredder out of the carton. Make

certain all parts and literature have been removed before the carton is discarded.

TOOLS REQUIREDFOR ASSEMBLY

(1) Phillips Screwdriver

(2) 1/2" or Adjustable Wrenches

(2) 7/16" or Adjustable Wrenches

(1) Funnel

uss Machine Screws 1/4-20 x 1/2" Long

Hex Lock Nuts

1/4-20 Thread

m -

q

p

FIGURE 1.