Craftsman 79585 manual Operation, Know Your CHIPPER-SHREDDER, Meets Ansi Safetystandards

•To attachthe bag, placethe openingof the bag overthechutedeflectorsoit completelycoversthe chuteopening.Depressthe plungeron thedraw-

string,andpullon thedrawstringuntilthe bagis tightaroundthechuteopeningReleaseplungerto.

lockitintopositionSeefigure5. .

OPERATION

KNOW YOUR CHIPPER-SHREDDER

READ THIS OWNER'S MANUAL AND SAFETY RULES BEFORE OPERATING YOUR CHIPPER-SHREDDER. Compare the illustrations with your chipper-shredder to familiarize yourself with the location of various controls and adjustments. Save this manual for future reference.

			Fuel
		Spark Plug,	Fill	Oil Fill and
Hopper Assembly	Chipper	Wire and _	Cap	Dipstick
		Boot
	Chute

I

Throttle

Control

Front of

Starter Chipper-

Handle Shredder

FIGURE 6.

MEETS ANSI SAFETYSTANDARDS

Sears chipper-shredders conform to the safety standard B71.6-1982 of the American National Standards Institute.

OPERATINGCONTROLS

RELEASE BAR--Used to release the hopper when raising or lowering. See figure 10.

PRIMER--Pumps additional fuel from the carburetor to the cylinder for use when starting a cold engine. See figure 14.

STARTER HANDLE--Used to manually start the

engine. See figure 6.

THROTTLE CONTROL--Permits selection of fast or

slow engine speed, and is used to stop the engine. See figure 6.

BEFORE USING YOUR CHIPPER-SHREDDER, AGAIN REFER TO THE "SAFETY RULES" AS SHOWN ON PAGE 2 OF THIS MANUAL. ALWAYS BE CAREFUL.

The operation of any chipper-shredder can result in foreign objects being thrown into the eyes, which can result in severe eye damage. Always wear the safety glasses provided with the chipper-shredder or eye shields before chipping or shredding, or while performing any adjustments or repairs. We recommend

Wide Vision Safety Mask for over spectacles or standard glasses available at Sears Retail or Catalog Stores.