Craftsman 917.270831 owner manual HOW to USE Your Tractor, Stopping

Models: 917.270831

1 56
Download 56 pages 48.71 Kb
Page 13
Image 13

The operation of any tractor can result in foreign objects thrown into the eyes, which can result in severe eye damage. Always wear safety glasses or eye shields while operating your tractor or performing any adjustments or repairs. We recommend a wide vision safety mask over spectacles or standard safety glasses.

HOW TO USE YOUR TRACTOR

TO SET PARKING BRAKE

Your tractor is equipped with an operator presence sensing switch. When engine is running, any attempt by the operator to leave the seat without first setting the parking brake will shut off the engine.

Depress clutch/brake pedal into full "BRAKE" position and hold.

Place parking brake lever in "EI_-

GAGED" position and release pres- sure from clutch/brake pedal. Pedal should remain in "BRAKE" position.

Make sure parking brake will hold

tractor

secure.

Attachment Clutch Lever

 

 

Choke

 

"Engaged"

Position

.

Control _--_--.Z

 

/

"Disengaged

._._ \

"_\"'..qiJ,Z,

:'_]

Position

 

Control"J

"_-;

"_i

_e"

.Parking

Brake

).uua'_..._.._

 

_

Clutc_r---'_ake _''''_

:

"Engaged"

°-_,// ....

 

Ped

 

"-

 

I-'OSltlOn

'_

_/

_...._.._j

Gearshift

_.

_"

_Lever

 

 

"Disengaged" u _

 

_t'_n,._.

 

Position

Height

Position

 

Adjustment

Knob

STOPPING

MOWER BLADES -

To stop mower blades,move attach- ment clutch lever to "DISENGAGED"

position.

GROUND DRIVE -

To stop ground drive, depress clutch/ brake pedal into full "BJ:IAKE" position.

Move gearshift lever to neutral (N) position.

ENGINE -

Move throttle control to slow position.

NOTE: Failure to move throttle control to

slow position and allowing engine to idle

before stopping may cause engine to "backfire".

Turn ignition key to "OFF" position and remove key. Always remove key when leaving tractor to prevent unauthorized use.

Never use choke to stop engine.

IMPORTANT: Leaving the ignition switch in any position other than "OFF" will cause the battery to be discharged,

(dead).

NOTE: Under certain conditions when tractor is standing idle with the engine running, hot engine exhaust gases may cause "browning" of grass. To eliminate this possibility, always stop engine when stopping tractor on grass areas.

CAUTION: Always stop tractor completely, as described above, before leaving the operator's position; to empty grass catcher, etc.

TO USE THROTTLE CONTROL Always operate engine at full throttle.

Operating engine at less than full

throttle reduces the battery charging rate.

Full throttle offers the best bagging and mower performance.

TO USE CHOKE CONTROL

Use choke conti'olwhenever you are starting a cold engine. Do not use to start a warm engine.

To engage choke control, pull knob out. Slowly push knob in to disen-

gage.

TO MOVE FORWARD AND BACKWARD

The direction and speed of movement is controlled by the gearshift lever.

Start tractor with clutcWbrake pedal depressed and gearshift lever in neutral (N) position.

Move gearshift lever to desired position.

Slowly release clutch/brake pedal to start movement.

IMPORTANT: Bring tractor to a complete

stop before shifting or changing gears. Failure to do so will shorten the useful

life of your transaxle.

TO ADJUST MOWER cu'n'ING

HEIGHT

The cutting height is controlled by turning the height adjustment knob in desired direction.

Turn knob clockwise ( _ ) to raise cutting height.

13

Page 13
Image 13
Craftsman 917.270831 owner manual HOW to USE Your Tractor, Stopping