TO START ENGINE WITH A WEAK BATTERY

,_WARNING: Lead-acid batteries generate explosive gases. Keep sparks, flame and smoking materials away from batteries.

Always wear eye protection when around batteries.

If your batten] is too weak to start the engine, it should be recharged. (See "BATTERY" in the MAINTENANCE section of this manual).

If "jumper cables" are used for emergency starting, follow this procedure:

IMPORTANT: Your tractor is equipped with a 12 volt system. The other vehicle must also be a 12 volt system. Do not use your tractor batten] to start other vehicles.

TO A-FFACH JUMPER CABLES -

1.

Connect

one

end

of the RED cable to

 

the POSITIVE (+) terminal of each

 

battery(A-B), taking care not to short

 

against

tractor

chassis.

2.

Connect

one

end

of the BLACK cable

 

to the NEGATIVE (-) terminal (C) of

 

fully charged

battery.

3.

Connect

the other

end of the BLACK

 

cable (D) to good chassis ground,

3.Install new battery with terminals in same position as old battery.

4.First connect RED battery cable to positive (+) terminal with hex bolt and

keps nut as shown. Tighten securely.

Slide terminal cover over terminal

5.Connect BLACK grounding cable to negative (-) terminal with remaining hex bolt and keps nut. Tighten securely.

Seat

Terminal

CoverKeps

Hex

Bolt

Positive

away from fuel tank and battery.

TO REMOVE CABLES, REVERSE ORDER -

1. BLACK cable first from chassis and

(Red) Cable

Neg

(Black) Cable

then from the fully charged battery.

2. RED cable last from both batteries.

Weak

or Dead

Fully Charged

Battery

Battery

REPLACING

BATTERY

 

_WARNING:

Do not

short battery

terminals by allowing a wrench or any other object to contact both terminals at

the same time. Before connecting battery, remove metal bracelets, wristwatch bands, rings, etc.

Positive terminal must be connected first to prevent sparking from accidental grounding.

1.Lift seat pan to raised position.

2.Disconnect BLACK battery cable first

then RED battery cable and carefully remove battery from tractor.

TO REPLACE HEADLIGHT BULB

1.Raise hood.

2.Pull bulb holder out of the hole in the backside of the grill.

3.Replace bulb in holder and push bulb holder securely back into the hole in the backside of the grill.

4.Close hood.

INTERLOCKS AND RELAYS

Loose or damaged wiring may cause your tractor to run poorly, stop running, or prevent it from starting.

Check wiring. See electrical wiring

diagram in the Repair Parts section.

TO REPLACE FUSE

Replace with 20 amp automotive-type plug-in fuse. The fuse holder is located behind the dash.

26

Page 26
Image 26
Craftsman 917.272068 To Start Engine with a Weak Battery, Replacing Battery, To Replace Headlight Bulb, To Replace Fuse

917.272068 specifications

The Craftsman 917.272068 is a highly efficient and robust lawn tractor designed to meet the needs of both homeowners and professional landscapers. Built with durability and performance in mind, this machine is ideal for tackling a variety of mowing tasks, whether you have a small residential lawn or a more expansive grass area.

One of the standout features of the Craftsman 917.272068 is its powerful 24 HP engine, which provides ample power to handle tough mowing conditions. The engine is specifically designed for reliability and longevity, ensuring that it can provide consistent performance over many seasons. Coupled with the dual blade system, the mower provides an even and clean cut, reducing the need for double mowing and optimizing efficiency.

The 917.272068 is equipped with a 42-inch cutting deck, allowing for wide swath mowing while maintaining agility around obstacles. The cutting height is adjustable, providing users with the flexibility to choose from various settings, ensuring a tailored cut to suit the season or grass type. This versatility makes it particularly advantageous for users with varying mowing preferences and lawn conditions.

Another notable feature is the hydrostatic transmission, which allows for smooth and effortless control of speed and direction. This feature enhances ease of use, particularly for those who may not be accustomed to operating larger machinery. The responsive controls enable precise maneuverability, making it possible to navigate tightly spaced areas with ease.

The Craftsman 917.272068 also includes comfortable seating and a user-friendly dashboard that displays essential information at a glance, such as fuel level and maintenance reminders. This focus on operator comfort is a crucial aspect of its design, making long mowing sessions more enjoyable and less fatiguing.

In terms of technology, the Craftsman 917.272068 supports mulching and rear discharge capabilities, providing users with the option to either recycle grass clippings back onto the lawn for nutrient replenishment or easily discharge clippings behind the mower. This dual functionality enhances the utility of the mower, catering to different user preferences and lawn care practices.

Overall, the Craftsman 917.272068 stands out with its fusion of power, efficiency, and user-friendly features. Its reliable performance, combined with adjustable mowing options and comfortable operation, positions it as a top choice for anyone looking to achieve a well-maintained lawn. Whether for residential use or professional landscaping, this lawn tractor is built to deliver excellent results season after season.