SERVICE REMINDER/HOUR METER Service reminder shows the total number of hours the engine has run and flashes to indicate that the engine or mower needs ser- vicing. When service is required, the service reminder will flash for two hours. To service

engine and mower, see the Maintenance section of this manual.

NOTE: Service reminder runs when the ignition key is in any position but "STOP". For acurate reading, be sure key remains in the "STOP" position when engine is not running.

BEFORE STARTING THE ENGINE CHECK ENGINE OIL LEVEL

The engine in your tractor has been shipped, from the factory, already filled with summer weight oil.

I. Check engine oil with tractor on level groun&

2.Unthread and remove oil fill cap/dipstick; wipe oil off. Reinsert the dipstick into the tube and rest oil fill cap on the tube_ Do not thread the cap onto the tube. Remove and read oil level. If necessary, add oil until "FULl/' mark on dipstick is reached° Do not overfill.

3.For cold weather operation you should change oil for easier starting (See the oil viscosity chart in the Maintenance section of this manual),

4.To change engine oil, see the Maintenance section in this manual.

5.Fill fuel tank to bottom of filler neck° Do

not overfill. Use fresh, clean, regular unleaded gasoline with a minimum of

87 octane. (Use of leaded gasoline will increase carbon and lead oxide deposits and reduce valve life). Do not mix oil with gasoline. Purchase fuel in quanti-

ties that can be used within 30 days to u_elaSsure fuel freshness.

CAUTION; Wipe off any spilled oil or

. Do not store, spill or use gasoline near an open flame.

IMPORTANT: When operating in temper- atures below 32°F(0°C), use fresh, clean winter grade gasoline to help ensure good cold weather starting,

CAUTION: Alcohol blended fuels (called gasohot or using ethanol or methanol) can attract moisture which leads to separation and formation of acids during storage. Acidic gas can damage the fuel system of an engine while in storage. To avoid engine problems, the fuel system should be emptied before storage of 30 days or longer. Drain the gas tank, start the engine and let it run until the fuel lines and carburetor are empty° Use fresh fuel next season° See Storage Instructions for additional information. Never use engine or carburetor cleaner products in the fuel tank or permanent damage may occur.

RESERVE FUEL VALVE OPERATION

I.Raise seat to access reserve fuel valve.

2.tn normal operation, valve should be set to primary (as shown in view)

3.If tractor runs out of fuel, rotate valve handle to reserve°

4.Drive tractor to be refueled.

5.After refueling, return valve to primary position.

Reserve

Fuel Vatve

@

Primary

TO START ENGINE

When starting the engine for the first time or if the engine has run out of fuel, it will take extra cranking time to move fuel from the tank to the engine.

1.Be sure freewheel control is in the trans- mission engaged position.

2.Sit on seat in operating position, depress brake pedal and set parking braker

3.Move attachment clutch to disengaged position.

4o Move throttle control to fast position

5.Pull choke control out for a cold engine start attempt. For a warm engine start

attempt the choke control may not be needed.

NOTE: Before starting, read the warm and cold starting procedures below.

18

Page 17 Page 19
Page 18
Image 18
Craftsman 917.289470 Before Starting the Engine Check Engine OIL Level, Reserve Fuel Valve Operation, To Start Engine
Page 17 Page 19

917.28947, 917.289470 specifications

The Craftsman 917.28947 and 917.289470 are robust lawn tractors designed for homeowners seeking durability, performance, and comfort in their yard care equipment. These models stand out in the Craftsman line due to their exceptional features, advanced technologies, and user-friendly characteristics.

At the core of both models is a powerful engine, typically a 19 HP or higher, ready to tackle various mowing conditions. The engine is combined with a smooth-running automatic transmission that facilitates easy operation, allowing the driver to focus on the task without worrying about shifting gears. This feature makes mowing large lawns or navigating through obstacles much simpler.

One of the most notable characteristics of the Craftsman 917.28947 and 917.289470 is their 42-inch cutting deck. This size is ideal for providing a quick yet efficient cut, capable of maneuvering in tighter spaces while still covering more ground than smaller decks. The cutting height can be easily adjusted to meet the needs of different types of grass and preferred lawn styles. This adaptability is part of what makes these models particularly appealing to a diverse range of users.

Incorporating advanced technologies, these lawn tractors often feature an ergonomic design, including a plush seat with back support that provides comfort during prolonged use. The easy-to-read dashboard displays critical information such as fuel level, speed, and battery status, allowing users to monitor their operation effectively.

Additionally, both models come equipped with essential safety features such as a safety switch that prevents the engine from starting when the operator is not seated. This attention to safety ensures peace of mind during operation, especially for those who may have children or pets around while mowing.

In terms of maintenance, the Craftsman 917.28947 and 917.289470 include features designed to make care manageable. The accessible design allows for easy cleaning and part replacement when necessary, ensuring that the tractors remain in top condition throughout their lifespan.

Overall, the Craftsman 917.28947 and 917.289470 represent a great combination of power, efficiency, and comfort, making them excellent choices for homeowners looking to maintain their lawns with ease and reliability. Whether tackling a small yard or a larger landscape, these lawn tractors are equipped to deliver effective performance season after season.
Top Page Image Contents