The nozzle at the end of the multi- adjustable spray wand can be rotated to change the high pressure spray pattern from a narrow jet to a 40º fan shape, as shown. Markings have been placed on the nozzle to help you select the spray pattern.
40º fan spray
narrow jet stream
For low pressure operation, extend the nozzle of the
low pressure
HOW TO USE THE DUAL TANK CLEANING SYSTEM
NOTE: Use only soaps and cleaning solutions designed for pressure washer use. Do not use bleach.
To apply cleaning solutions:
1.Make sure cleaning solution tanks are assembled and all hoses are connected.
2.Turn control valve knob arrow to the down (off) position as shown.
Control Valve Knob
3.Fill cleaning solution tanks with desired cleaning solution. Each tank holds approximately 1.25 gallon. NOTE: The cleaning solution/water ratio is 7:1, for every 7 gallons of water pumped, 1 gallon of cleaning solution will be used.
Never fill cleaning solution tanks with
gasoline or other flammable solvent.
4.Turn control valve knob toward tank with desired cleaning solution.
Tank to be used
5.Set
6.After use of cleaning solution the chemical injector MUST be rinsed, follow the instructions in the Shutting Down paragraph after each use.
NOTE: Cleaning solutions will not siphon when spray wand is in the high pressure setting.
DUAL TANK CLEANING
SOLUTION TIPS
1.Each tank may be filled with different cleaning solutions depending on the task to be performed. Example: deck and driveway. Fill one tank with deck cleaning solution and the other with driveway cleaning solution. Clean the deck with the deck cleaning solution and then simply turn the control knob toward the driveway cleaning solution and clean the driveway.
D30333 | 12- ENG |
