Introduction

Before You BeginSystem Requirements

Congratulations on your purchase of Creative PC-DVDEncore! This guide provides you with information on how to install and operate the PC-DVD Encore hardware and software.

The README file on the Creative PC-DVD Encore diskette contains information and changes that were not available at the time of printing. Read the file before you continue.

You may want to make a backup copy of the diskette before you begin. In addition, read the following:

System Requirements

Document Conventions

Miniumum system requirements for PC-DVD Encore are as follows:

A Pentium® 100 MHz PC or compatible

16 MB RAM

8 MB available hard disk space

SVGA graphics adapter with 2 MB RAM (minimum 800x600 at 256 colors, 16-bit color support recommended)

PCI expansion slot for the Dxr2 decoder card

Enhanced IDE connector on the motherboard or PCI interface card (bus mastering with DMA support recommended)

Drive bay (half-height) for the Creative PC-DVD drive (drive rails may be required for some systems and are not included)

Sound Blaster or 100 percent compatible Sound Blaster audio card (Sound Blaster 32, AWE32, or Sound Blaster AWE64 is highly recommended)

Microsoft® Windows® 95, Windows 98, or Windows NT

Introduction xi