Primary IDE Connector with Hard Disk Drive

To connect the PC-DVD drive to the primary IDE connector with the hard disk:

1.Back up the files on your hard disk drive before you proceed.

2.Set the jumpers on the PC-DVD drive and the hard disk drive (see page 2). Set the hard disk drive to master; set the PC-DVD drive to slave.

3.Connect the power cable and IDE data cable to your hard disk drive.

PC-DVD drive (slave)

 

Power

 

cable

 

PC-DVD

Hard disk drive

audio cable

(master)

Pin 1

 

 

Power

 

cable

 

Colored

 

stripe

IDE data cable

 

Note: Align the colored

 

stripe of the IDE data cable

 

to pin 1 of the hard disk

To primary IDE

drive’s data connector.

connector.

 

4.Connect the PC-DVD audio cable to the Dxr2 decoder card’s Audio In connector (see figure on page 3).

5.Slide the drives back into place and secure them to the computer (screws are provided for the PC- DVD drive).

6.Proceed to “Step 5: Connect Other Devices to the Dxr2. ”

Installing PC-DVD Encore 11